| Monitoring Recording Options | Single Use, Single-Use with User Programmable Overwrite, or Multiple Use |
| Probe Temperature Measurement Range | -30°C to + 70°C |
| Probe Sensor Accuracy Range |
- ± 0.5°C from -10°C to +45°C
- ± 1.0°C from -30°C to -10°C
- ± 1.0°C from +45°C to +70°C
|
| Monitor Operating Range | -30°C to +70°C |
| Temperature Resolution | 0.1°C over full temperature measurement range |
| Data Memory Type | Non-volatile 16K Flash memory |
| Data Storage Capacity | 16,000 data points (16K) |
| Battery Life / Type | 12 months operating life / 3.6v lithium battery |
| Data Sampling Interval | Programmable from 30 seconds up to a maximum of 120 minutes |
| Water Resistant Housing | IP64 (with detachable probe connected to monitor) |
| Start Up Delay | 0 minutes to 24 hours |
| Programmable Alarms |
- High and low limits – alarm is triggered when temperature exceeds set limits;
- Multi Alarm – up to six: single temperature limit, temperature range, dual temperature range, MKT, duration
|
| Alarm Delay Time Thresholds | Single event (continuous) or cumulative |
| LCD Indicators |
- Started, start-up delay, running, stopped;
- Alarm status: OK (✓), Alarmed (✗);
- Trip summary data (average, minimum, maximum); Current temperature reading;
- Time remaining / time elapsed against alarm-time thresholds;
- PROBE; Flashing X when probe disconnects from monitor cable
|
| Cable Length Options | 1.5m |
| Outer diameter of cable (typical) | 3.5mm |
| Start Up Options | Manual push button or automatic launch option |
| Weight | 90.7 grams (includes monitor with 1.5m probe) |
| Quality Assurance Certifications |
- CE, RTCA – D016ØG compliant, RoHS compliant, Response time tested to U.S. Pharmacopeia (USP) <1118> and EN 12830 standards;
- 3-point NIST® Traceable Certificate of Calibration;
- Validation Manual
|
| Minimum System Requirements | Windows® PC w/ Windows® 7 Pro (64-bit) or higher; Adobe® Reader 9.0 or higher |
| Data Analysis and Cold Chain Continuous Improvement Software |
- TempTale Manager® Desktop 8.0 or higher; ColdStream® Cold Chain Manager 1.8B or higher;
- ColdStream® Web 1.3.1
|
| Computer Interface | USB 2.0, A-type plug |
