TempTale® Ultra Dry Ice Probe
首頁 » 全部產品 » 監控記錄儀器 (Temperature Logger) » 品牌：Sensitech » 多次型 MU » TempTale® Ultra Dry Ice Probe

TempTale® Ultra Dry Ice Probe

  • Monitor products that require very low temperatures to maintain their stability
  • Detachable dry ice probe
  • Disconnect/reconnect probe to assess temperature data and alarm status without opening the carto
  • 適合生命科學產業
TempTale® Ultra Dry Ice Probe Specifications
Monitoring Recording OptionsSingle Use, Single-Use with User Programmable Overwrite, or Multiple Use
Probe Temperature Measurement Range-95°C to + 30°C (-139°F to +86°F)
Probe Sensor Accuracy Range
  • ±2.0°C from -95°C to -90°C (±3.6°F from -139°F to -130°F)
  • ±1.5°C from -90°C to +30°C (±2.7°F from -130°F to +86°F)
Monitor Operating Range-30°C to + 70°C (-22°F to +158°F)
Temperature Resolution0.1°C/F over full temperature measurement range
Data Memory TypeNon-volatile 16K Flash memory
Data Storage Capacity16,000 data points (16K)
Battery Life / Type12 months operating life / 3.6v lithium battery
Data Sampling IntervalProgrammable from 30 seconds up to a maximum of 120 minutes
Water Resistant HousingIP64 (with detachable probe connected to monitor)
Start Up Delay0 minutes to 24 hours
Programmable Alarms
Alarm Mode Options
  • High/Low
  • Multi-Alarm (up to six) – single temperature limit, temperature range, dual temperature range, MKT, duration
Alarm Delay Time ThresholdsSingle event (continuous) or cumulative
LCD Indicators
  • Started, start-up delay, running, stopped;
  • Alarm status: OK (✓), Alarmed (✗);
  • Trip summary data (average, minimum, maximum);
  • Current temperature reading;
  • Time remaining / time elapsed against alarm thresholds;
  • PROBE and X flash when probe disconnects from monitor
Cable Length Options1m and 3m
Outer diameter of cable (typical)3.5mm
Weight (typical)82.2 grams (2.9 oz) with 1m probe 119.0 grams (4.2 oz) with 3m probe
Quality Assurance Certifications
  • CE, RTCA – D016ØG compliant, RoHS compliant, Response time tested to U.S. Pharmacopeia (USP) <1118> and EN 12830 standards;
  • 3-point NIST® Traceable Certificate of Calibration;
  • Validation Manual
Minimum System RequirementsWindows® PC w/ Windows® 7 Pro (64-bit) or higher; Adobe® Reader 9.0 or higher
Data Analysis and Cold Chain ContinuousTempTale Manager® Desktop 8.0 or higher; ColdStream® Cold Chain Manager 1.8A or higher;
Improvement SoftwareColdStream® Web 1.1
Computer InterfaceUSB 2.0, A-type plug