| Monitor Recording Options | Single-Use |
| Temperature Measurement Range | -30°C to +70°C (-22°F to +158°F) |
| Temperature Accuracy Range |
- ±0.5°C from -10°C to +45°C (±0.9°F from 14°F to +113°F)
- ±1.0°C from -30°C to -10°C (±1.8°F from -22°F to +14°F)
- ±1.0°C from +45°C to +70°C (±1.8°F from +113°F to +158°F)
|
| Temperature Resolution | 0.1°C/F over full Temperature Measurement Range |
| Data Memory Type | Non-volatile 16K Flash Memory |
| Data Storage Capacity | 16,000 data points (16K) |
| Battery Life/Type | 6 month operating life/3.0v lithium battery—non-replaceable |
| Data Sampling Interval | Programmable from 30 seconds up to a maximum of 15 minutes |
| Water Resistant Housing | IP 64 (with protective cap over USB connector) |
| Start-Up Delay | 0 minutes to 24 hours |
| Programmable Alarms |
- Programmable high and low limits—alarm is triggered when temperature exceeds set limits;
up to two alarm types high/low
- Alarm Delay Time Thresholds (Single-Event, Cumulative)
|
| LCD Indicators | - Started, Startup Delay, Running, Stopped
- Alarm status: OK (✓), Alarmed (✗)
- Trip summary data (average, min, max)
- Current Temperature Reading
- Marked Event
|
| Start-Up Options | Manual push button or automatic launch option |
| Typical Dimensions | 108 mm L X 53 mm W X 7 mm H |
| Weight | Approx. 40 g (1.4 oz) |
| Quality Assurance Certifications |
- CE, RTCA – D016ØG compliant, RoHS compliant, Response time tested to U.S. Pharmacopeia (USP) <1118> and EN 12830 standards;
- 3-point NIST® Traceable Certificate of Calibration;
- Validation Manual
|
| Minimum System Requirements | Windows PC w/ Windows 8.1 or higher; Adobe Reader 9.0 or higher |
| Data Analysis Software | TempTale® Manager Desktop 8.2 or higher ColdStream® |
| Computer Interface | USB 2.0, A-Type plug |
